Dhanlaxmi Steel Distributors

High Tensile Brass Rods are a type of copper-zinc alloy engineered for applications requiring superior strength, hardness, and corrosion resistance. They typically contain a higher percentage of zinc (around 60%) along with small additions of lead, iron, and manganese to enhance machinability and mechanical performance. These rods are widely used in precision engineering, marine fittings, and fasteners due to their exceptional strength and resistance to stress corrosion cracking.

• High Strength & Durability: Excellent tensile strength suitable for heavy-duty components.

• Good Machinability: Allows easy cutting, drilling, and shaping without tool wear.

• Corrosion Resistance: Performs well in marine and industrial environments.

• Wear Resistance: Suitable for components subjected to friction and load.

• Attractive Appearance: Bright golden finish ideal for decorative and architectural use.

• IS 320 HT1 / HT2

• BS 2874 CZ114 / CZ115

• ASTM B16 / B453

• Round Rods

• Hexagonal Bars

• Square Bars

• Flat Bars

• Marine Hardware & Propeller Shafts

• Fasteners, Nuts & Bolts

• Gears, Bushes & Bearings

• Valves & Pump Components

• Heavy Electrical Equipment

• Decorative Architectural Components

Leaded Brass Round Bar is an alloy of copper and zinc with a small addition of lead (commonly 1.5–3%). The presence of lead improves machinability, wear resistance, and corrosion resistance, making it one of the most widely used brass alloys for precision components. It offers a smooth finish, easy workability, and excellent performance in both mechanical and decorative applications.

• Copper (Cu): 57 – 63%

• Zinc (Zn): Balance

• Lead (Pb): 1.5 – 3.0%

• Iron (Fe): ≤ 0.35%

• Minor impurities: ≤ 0.3%

• Excellent Machinability – Free-cutting alloy suitable for high-speed machining.

• Good Corrosion Resistance – Performs well in fresh water, mild chemicals, and atmospheric conditions.

• High Wear Resistance – Withstands friction and mechanical stress.

• Non-Sparking & Non-Magnetic – Suitable for sensitive and hazardous environments.

• Smooth Surface Finish – Ideal for precision and decorative parts.

• Automotive Industry – Precision components, fuel system parts.

• Electrical & Electronics – Connectors, terminals, switchgear.

• Marine Applications – Fittings, fasteners, and valves.

• General Engineering – Bushings, bearings, gears, couplings.

• Hardware & Decorative – Handles, knobs, plumbing fixtures.

• Round Bars (hot rolled, cold drawn, bright finish)

• Hex, square, and custom shapes on request

• Standard and cut-to-size lengths

High Tensile Brass Round Bars are copper-zinc alloy bars with added elements such as manganese, iron, and aluminum to enhance strength, hardness, and corrosion resistance. These bars are well-known for their excellent machinability, durability, and resistance to dezincification, making them ideal for high-performance engineering applications.

• Material: High Tensile Brass (Copper-Zinc Alloy)

• Form: Round Bars, Rods

• Size Range: 10 mm – 300 mm diameter (custom sizes available)

• Finish: Polished, Bright, Extruded, or Forged

• High tensile strength & toughness

• Excellent machinability & corrosion resistance

• Good wear resistance & durability

• Suitable for high-stress and marine environments

• Non-sparking and anti-corrosive properties

• Marine hardware & shipbuilding

• Automotive & aerospace components

• Heavy-duty engineering parts

• Pump shafts, valves & fasteners

• Industrial machinery & gear components

• Electrical & decorative applications

High Tensile Brass Grades: HTB1, HTB2, HTB3

High Tensile Brass (HTB) alloys are copper-zinc alloys strengthened with small additions of elements such as iron, aluminum, and manganese. These alloys offer excellent mechanical strength, wear resistance, and corrosion resistance, making them ideal for heavy-duty applications like marine hardware, fasteners, bearings, and valves.

Standards: BS 2872 / BS 2874 / IS 320

• HTB1: Balanced strength and ductility; suitable for general engineering components.

• HTB2: Higher strength with moderate ductility; used for heavy-duty and marine applications.

• HTB3: Highest strength and hardness; ideal for wear-resistant parts and high-stress environments.

• Marine fittings and propeller components

• Bushes, bearings, and valve bodies

• Fasteners and connectors

• Gears and shafts

• Heavy-duty mechanical parts

Imported Brass Sheet 8x4 refers to a high-quality brass sheet with dimensions 8 feet × 4 feet (2440 mm × 1220 mm), sourced from international manufacturers. These sheets are designed for decorative, industrial, and mechanical applications, offering excellent corrosion resistance, durability, and a smooth surface finish.

• Premium imported brass with high corrosion resistance

• Standard 8×4 ft size, suitable for large-scale projects

• Uniform thickness for precision fabrication

• Smooth surface finish for decorative or industrial use

• Excellent machinability, bending, and forming capabilities

• Lead-free variants available for potable water applications

• Decorative panels, cladding, and furniture

• Industrial fabrication and machinery components

• Electrical and instrumentation panels

• Plumbing and sanitary systems

• Marine and offshore applications

• Precision components and decorative art pieces

• ASTM B16 / B111 / B124 – Brass sheets

• EN 1652 / EN 1654 – Copper alloy standards

• ISO 9001 / EN 1654-1 – Quality management

• NSF / ANSI 61 – Lead-free potable water compliance

• High corrosion resistance and durability

• Uniform thickness and precise dimensions

• Easily fabricated, cut, bent, or stamped

• Attractive finish suitable for decorative and industrial applications

• Lead-free options available for safe potable water use

Brass Sheets and Strips are flat products made from high-quality brass alloys, widely used in decorative, industrial, and engineering applications. They are valued for their corrosion resistance, excellent machinability, ductility, and attractive golden appearance. Brass sheets and strips are available in various thicknesses, widths, lengths, and finishes, making them suitable for both functional and aesthetic applications.

• High corrosion resistance, suitable for water, air, and mild chemicals

• Excellent machinability, bending, and forming capabilities

• Ductile and malleable, ideal for stamping, cutting, and shaping

• Attractive golden appearance for decorative use

• Available in coils, sheets, and strips of custom sizes

• Lead-free options available for sanitary and potable water applications

• Polished / Bright Finish – Decorative and aesthetic applications

• Matt / Satin Finish – Industrial and architectural use

• Mirror Finish – High-end decorative panels

• Pre-painted / Coated – Protection and color options

Brass Round Pipes are cylindrical tubes made from high-quality brass alloys, primarily C36000 or C37700, known for their corrosion resistance, durability, and excellent machinability. These pipes are widely used in plumbing, industrial, decorative, and marine applications, where both mechanical strength and aesthetic appeal are important.

• Made from high-quality brass for corrosion resistance

• Smooth internal and external surfaces for fluid flow

• Excellent machinability and formability

• Suitable for plumbing, gas, hydraulic, and industrial piping

• Lead-free variants available for potable water systems

• Available in standard and custom lengths, diameters, and wall thicknesses

A Hexagonal Brass Spacer is a precision-engineered component used to maintain a fixed distance between two parts in mechanical, electrical, or structural assemblies. The hexagonal shape allows easy fastening with a wrench, making installation and adjustment simple. Made from high-quality brass, these spacers are durable, corrosion-resistant, and electrically conductive, making them suitable for a wide range of industrial applications.

• Hexagonal shape for easy installation with a wrench

• Maintains precise spacing between components

• Made from high-quality brass for corrosion resistance and durability

• Reusable and serviceable

• Suitable for electrical, mechanical, and structural applications

• Lead-free options available for safe use in potable water or sensitive systems

• Electrical and electronic assemblies

• Mechanical and industrial machinery

• Automotive and aerospace components

• Structural supports and frames

• Plumbing and hydraulic assemblies

• Precision instruments

• Durable and corrosion-resistant

• Easy to install with standard tools

• Maintains precise spacing and alignment

• Reusable and serviceable

• Suitable for industrial, electrical, and mechanical applications

A Brass Angle Profile is an L-shaped metal section made from high-quality brass alloys. It is widely used in structural, decorative, and industrial applications, providing strength, durability, and aesthetic appeal. The angle profile can be used for framing, supports, edging, and fabrication purposes.

• L-shaped profile for structural and decorative use

• Made from corrosion-resistant brass for long service life

• Durable and strong, suitable for load-bearing and framing applications

• Excellent machinability and formability

• Available in various sizes, thicknesses, and lengths

• Lead-free options available for potable water and sanitary applications

• Decorative architectural elements and furniture

• Framing, edging, and support structures

• Electrical and instrumentation components

• Mechanical and industrial components

• Plumbing and sanitary applications

• Marine and offshore components

A Brass Distributor 40 Way is a type of manifold or distribution block used in fluid or gas piping systems to distribute a single input into multiple output lines. Made from high-quality brass, this distributor provides corrosion resistance, durability, and precise flow management. The “40 Way” indicates that the distributor can branch the flow into 40 separate outlets, making it suitable for complex plumbing, industrial, or hydraulic systems.

• Made from high-quality brass (C36000 or lead-free variants)

• 40 outlets for distributing fluid or gas efficiently

• Corrosion-resistant, suitable for water, oils, air, and mild chemicals

• Threaded or compression connections for secure installation

• Durable and reusable, suitable for high-pressure systems

• Facilitates easy maintenance and system balancing

• Threaded Male / Female – Standard pipe connection

• Compression / Push-Fit – Quick installation

• Custom fittings available for specific applications

• Potable water distribution systems

• Heating and cooling manifolds (HVAC)

• Industrial fluid distribution

• Hydraulic and pneumatic systems

• Gas piping systems

• Multi-zone irrigation systems

• Efficient multi-line distribution from a single inlet

• Corrosion-resistant and durable

• Easy installation and maintenance

• Compatible with standard piping systems

• Customizable to specific sizes, threads, and outlet configurations

A Brass Hex Reducer is a pipe fitting used to connect two pipes of different diameters while maintaining a secure, leak-proof connection. The hexagonal center allows easy tightening with a wrench. Made from high-quality brass, these fittings are corrosion-resistant, durable, and suitable for potable water, gas, and industrial applications.

• Hexagonal center for easy wrench tightening

• Connects pipes of different sizes

• Threaded ends for leak-proof connections

• Durable brass construction for long service life

• Corrosion-resistant, suitable for water, gas, and oil lines

• Reusable and serviceable

• NPT (National Pipe Thread) – Common in the USA

• BSP / BSPT (British Standard Pipe) – UK & metric standard

• Custom threads available on request

• Plumbing and potable water pipelines

• Gas line connections

• Hydraulic and industrial fluid systems

• Marine and offshore piping

• HVAC systems and equipment

• Chemical and process piping

• ASTM B16 / B62 – Brass fittings

• ISO 9001 / EN 1254-1 – Quality and material standards

• ASME B1.20.1 / BS 21 – Threaded pipe standards

• NSF / ANSI 61 – Drinking water compliance for lead-free fittings

• Leak-proof, corrosion-resistant, and durable

• Easy installation and maintenance

• Reusable union design for servicing pipelines

• Compatible with standard threaded pipes

• Suitable for potable water, gas, and industrial fluids

UNS C83600 is a high-lead tin bronze alloy, commonly known as Ounce Metal, widely used for bearings, bushings, and industrial components requiring wear resistance, low friction, and corrosion resistance. UNS C83600 rods are supplied in solid forms and are highly machinable, making them ideal for precision engineering applications.

• Excellent wear and friction resistance

• High corrosion resistance, including marine environments

• Good machinability and precision fabrication

• Self-lubricating due to lead content

• Suitable for heavy-duty bearings, bushings, and sliding components

• Solid Round Rods / Bars – standard and custom diameters

• Precision-machined rods – for bearing and sleeve applications

• Custom-cut lengths – per requirement

• Bearings and Bushings

• Gear Components and Wear Parts

• Valves and Pump Components

• Marine Hardware and Saltwater Applications

• Hydraulic and Pneumatic Equipment

• Industrial Machinery

• ASTM B505 / B505M – High-lead tin bronze rods

• SAE J461 / J462 – Bearing materials

• ISO 6509 – Copper alloys for bearings

• UNS C83600 – Unified numbering system designation

Summary: UNS C83600 rods are durable, corrosion-resistant, and self-lubricating, making them ideal for high-performance industrial, marine, and mechanical applications where low friction and high wear resistance are critical.

C83600 is a designation for a high-lead tin bronze alloy commonly known as Ounce Metal. These rods are known for their excellent wear resistance, corrosion resistance, and low friction properties, making them suitable for bearings, bushings, and industrial machinery.

Ounce Metal is widely used in applications where sliding, rotating, or bearing surfaces are required due to its lubricating properties and durability.

• High wear and friction resistance

• Excellent corrosion resistance in marine and industrial environments

• Good machinability for precision components

• Self-lubricating properties due to lead content

• Suitable for heavy-duty bearing and bushing applications

• Round Rods / Bars – Solid rods of varying diameters

• Custom-cut lengths – As per client requirements

• Slitted or machined rods – For bearing, bushing, or sleeve applications

• Bearings and Bushings (Plain and Sleeve)

• Gears and Wear Components

• Valves and Pumps

• Industrial Machinery Components

• Marine Equipment (Saltwater Applications)

• Hydraulic and Pneumatic Systems

• ASTM B505 / B505M – High-Lead Tin Bronze Rods

• SAE J461 / J462 – Bearing Materials

• ISO 6509 – Copper Alloys for Bearings

Brass Forged Fittings are high-strength pipe fittings manufactured by forging solid brass billets into desired shapes under high pressure. This process produces dense, durable, and corrosion-resistant fittings with excellent mechanical properties. They are widely used in plumbing, gas, hydraulic, and industrial piping systems where leak-proof connections and long service life are essential.

• Manufactured from high-quality brass alloys (C36000, C37700, C38500)

• Forging process ensures superior strength and durability

• Corrosion-resistant in water, gas, oil, and chemical systems

• Threaded, socket, or compression ends for easy connection

• Leak-proof design suitable for high-pressure applications

• Reusable and serviceable

• NPT (National Pipe Thread) – Common in USA

• BSP / BSPT (British Standard Pipe) – UK & metric standard

• Custom threads available on request

• Plumbing and potable water pipelines

• Gas distribution and HVAC systems

• Hydraulic and industrial fluid systems

• Marine and offshore piping

• Chemical and process piping

• Instrumentation and machinery connections

A Brass Flare Union is a type of pipe fitting used to join two flared tubes together in plumbing, gas, refrigeration, or hydraulic systems. Made from high-quality brass, flare unions provide a leak-proof, durable, and corrosion-resistant connection while allowing easy disassembly for maintenance or modifications.

• Connects two flared tubes securely for a leak-proof seal

• Made from corrosion-resistant brass for long-lasting performance

• Reusable and serviceable, allowing easy maintenance

• Compatible with copper, brass, and other tubing materials

• Lead-free variants available for potable water systems

• Suitable for gas, water, HVAC, refrigeration, and hydraulic systems

• Gas and water piping connections

• Refrigeration and air conditioning lines

• Hydraulic and pneumatic tubing systems

• Plumbing and sanitary pipelines

• HVAC and mechanical systems

\

Naval Brass Round Bars are copper-zinc alloy bars with a small addition of tin, giving them excellent corrosion resistance in seawater and marine environments. This alloy provides a combination of strength, toughness, and machinability, making it highly suitable for shipbuilding, marine hardware, and industrial applications exposed to saltwater.

• Material: Naval Brass (Cu-Zn-Sn Alloy)

• Standard: ASTM B21 / B151 or equivalent

• Form: Round Bars, Rods

• Size Range: 10 mm – 300 mm diameter (custom sizes available)

• Finish: Extruded, drawn, polished, or machined

• Outstanding corrosion resistance in seawater

• High strength and toughness

• Good wear resistance & machinability

• Non-sparking and anti-corrosive properties

• Long service life in marine applications

• Marine hardware & shipbuilding components

• Propeller shafts & pump shafts

• Heat exchanger and condenser tubes

• Bushings, fasteners & valve components

• Decorative architectural applications

• Industrial equipment exposed to seawater

Brass Tubes are cylindrical hollow sections made from high-quality brass alloys, widely used for fluid transfer, decorative applications, and mechanical components. They are known for their corrosion resistance, durability, excellent machinability, and aesthetic appeal.

Brass tubes are preferred in applications where both mechanical strength and appearance are important. They are available in round, square, and rectangular profiles, with custom sizes, thicknesses, and surface finishes.

• Made from high-quality brass alloys (C36000, C37700, C38500)

• Corrosion-resistant, suitable for water, gas, oil, and mild chemicals

• Excellent machinability and formability

• Smooth internal and external surfaces for fluid flow

• Available in various lengths, diameters, wall thicknesses, and finishes

• Lead-free variants available for potable water systems

• Polished / Bright Finish – Decorative applications

• Matt / Satin Finish – Interior plumbing and architectural use

• Nickel-Plated / Chrome-Plated – Corrosion protection for industrial and marine use

Brass Nipple Fittings are short pieces of threaded brass pipe used to connect two fittings, pipes, or valves in plumbing, gas, hydraulic, or industrial piping systems. Made from high-quality brass alloys, these nipples provide corrosion resistance, durability, and leak-proof connections, ensuring reliable fluid or gas flow.

• Short, threaded pipe sections for connecting pipes and fittings

• Made from corrosion-resistant brass for long-lasting performance

• Leak-proof connections for water, gas, oil, and other fluids

• Available in various sizes, lengths, and thread types

• Lead-free options available for potable water systems

• Reusable and serviceable, easy to install

A Brass Flare Nut is a type of threaded fitting used to secure flare tubing connections in plumbing, gas, refrigeration, and hydraulic systems. It provides a leak-proof connection by compressing the flared end of a tube against a fitting. Made from high-quality brass, it offers excellent corrosion resistance, durability, and machinability.

• Threaded brass nut designed for flared tubing connections

• Corrosion-resistant and durable

• Ensures a leak-proof seal when properly tightened

• Compatible with copper, brass, and stainless steel tubing

• Reusable and easy to install or replace

• Suitable for gas, water, HVAC, and hydraulic applications

• Gas and water piping connections

• Refrigeration and air conditioning lines

• Hydraulic and pneumatic tubing systems

• Plumbing and sanitary pipelines

• HVAC and mechanical systems

• Leak-proof connections for flared tubing

• Durable and corrosion-resistant

• Easy to install, disassemble, and reuse

• Compatible with standard tubing materials

• Suitable for high-pressure and high-temperature applications

Brass Tube Fittings are components used to connect, join, or terminate brass tubes in plumbing, gas, hydraulic, and industrial piping systems. Made from high-quality brass alloys, these fittings provide durable, corrosion-resistant, and leak-proof connections. They are suitable for low to medium-pressure applications and are widely used in residential, commercial, and industrial systems.

• Connects brass tubes securely with threaded or compression connections

• Corrosion-resistant and durable for long service life

• Provides leak-proof connections for water, gas, oil, and other fluids

• Available in various types and sizes for different applications

• Lead-free options available for potable water systems

• Reusable and serviceable, easy to install

• Plumbing and potable water pipelines

• Gas and fuel line connections

• Hydraulic and pneumatic systems

• HVAC and refrigeration lines

• Industrial process piping

• Marine and offshore piping

• Durable and corrosion-resistant

• Provides leak-proof and reliable connections

• Wide variety of types for different applications

• Easy installation and maintenance

• Compatible with standard brass tubing and pipes

A Brass Union is a type of pipe fitting that connects two pipes together while allowing easy disconnection without cutting the pipes. Made from high-quality brass alloys, brass unions provide corrosion resistance, durability, and leak-proof connections, making them ideal for plumbing, gas, hydraulic, and industrial applications.

• Connects two pipes with the ability to disassemble easily

• Made from corrosion-resistant brass for long service life

• Threaded or compression ends for secure connections

• Reusable and serviceable, ideal for maintenance-heavy systems

• Compatible with water, gas, oil, and mild chemicals

• Lead-free variants available for potable water

A Brass Elbow Fitting is a type of pipe fitting used to change the direction of flow in a piping system, typically at 45° or 90° angles. Made from high-quality brass, these fittings provide corrosion resistance, durability, and leak-proof connections for water, gas, oil, and other fluids. Brass elbows are widely used in plumbing, hydraulic, gas, HVAC, and industrial piping systems.

• Changes direction of piping at 45° or 90° angles

• Made from durable, corrosion-resistant brass

• Threaded or compression ends for easy installation

• Leak-proof and reusable, ideal for maintenance-heavy systems

• Compatible with water, gas, oil, and mild chemicals

• Lead-free options available for potable water systems

• Plumbing and potable water pipelines

• Gas line connections

• Hydraulic and industrial fluid systems

• HVAC and mechanical piping

• Marine and offshore piping

• Chemical and process piping

• Leak-proof, durable, and corrosion-resistant

• Easy installation, maintenance, and reuse

• Available in various sizes and angles

• Suitable for industrial, plumbing, hydraulic, and gas systems

• Compatible with standard brass tubing and pipes

Welding Neck Flanges (WN Flanges) are high-strength flanges designed to be butt-welded to pipes for a permanent, leak-proof connection. They feature a long tapered hub that provides reinforcement at the joint and ensures smooth flow of fluids. These flanges are widely used in high-pressure, high-temperature, and critical applications across chemical, petrochemical, oil & gas, and power industries.

• Tapered hub for stress distribution and reinforcement

• Butt-weld connection ensures strong, permanent joints

• Suitable for high-pressure and high-temperature systems

• Available in various materials: Carbon Steel, Stainless Steel, Alloy Steel

• Corrosion and wear-resistant depending on material grade

• Precision-machined face for tight sealing with gaskets

• Raised Face (RF) – Most common; easy gasket sealing

• Flat Face (FF) – For flanges bolted to flat surfaces

• Ring Type Joint (RTJ) – High-pressure applications

A Brass Hex Union is a plumbing and piping fitting used to connect two pipes or tubes while allowing easy disconnection for maintenance or replacement. It features a hexagonal central body that enables tightening with a wrench and threaded ends for a secure, leak-proof connection. Made from high-quality brass, these fittings are corrosion-resistant, durable, and suitable for potable water and industrial applications.

• Hexagonal center for easy wrench tightening

• Threaded ends provide leak-proof connections

• Durable brass construction for long service life

• Corrosion-resistant, suitable for water, gas, and oil lines

• Reusable and serviceable

• Compatible with copper, brass, or plastic pipes

• NPT (National Pipe Thread) – Common in USA

• BSP / BSPT (British Standard Pipe) – UK & metric standard

• Custom threads available on request

• Plumbing and potable water pipelines

• Gas line connections

• Hydraulic and industrial fluid systems

• Marine and offshore piping

• HVAC systems and equipment

• Chemical and process piping

• ASTM B16 / B62 – Brass fittings

• ISO 9001 / EN 1254-1 – Quality and material standards

• ASME B1.20.1 / BS 21 – Threaded pipe standards

• NSF / ANSI 61 – Drinking water compliance for lead-free fittings

• Leak-proof, durable, and corrosion-resistant

• Easy installation and maintenance

• Reusable union design for servicing pipelines

• Compatible with standard threaded pipes

• Suitable for potable water, gas, and industrial fluids