Dhanlaxmi Steel Distributors

A titanium electronic circuit is made by printing insulators, conductors, resistors and other materials onto the titanium metal.  Electronic and non-electronic components are then added to the printed titanium to produce a complete electronic circuit that can be bolted on.  The titanium electronic circuit can be welded, bent and formed, and also have holes added for mounting, with no need for a containing box.

Titaniums Advantages include:
Highly accurate active circuit calibration
Higher reliability due to less solder interconnections
Wider operating temperature range
Smaller size, exceptionally compact (approximately half the size of the most complex PCB), PLUS a higher packing density
Fully encapsulated for complete protection from the environment
Enhanced reliability

• Strong construction
• Anti corrosive
• Light weight

we are one of the leading supplier, manufacturer, stockist / stockholder, dealer, distributor, retailer, wholesaler and exporter of titanium wire mesh  based in mumbai, india.

titanium mesh is made of titanium wire ta1 while the expanded and perforated mesh are made by expanding and punching the titanium sheet ta1 respectively.
titanium mesh is significant for its durability, lightweight and excellent corrosion resistance properties. It is used in the several industries such as aerospace, medical and electric industry. Generally commercially pure titanium is utilized in the anodizing applications.

Established in 1984, Dhanlaxmi Steel Distributors is Indias Largest Fittings Manufacturer with Head Office and Manufacturing Plant in Mumbai. We Offer Large Range of Fittings for Valve, Pumps, Hydraulic, Instrumentation, Compression, Domestic, Commercial, Industrial, Shipbuilding Application, etc.

• Amazing finish
• Economical
• Rust proof

Overview:
Titanium Grade 2 is a commercially pure titanium (CP-Ti) alloy that offers excellent corrosion resistance, good strength, and high ductility. It is widely used in chemical, marine, aerospace, and medical industries where corrosion resistance is critical but ultra-high strength is not required.

Chemical Composition (Typical %):

• Titanium (Ti): Balance

• Iron (Fe): 0.30% max

• Oxygen (O): 0.25% max

• Carbon (C): 0.08% max

• Nitrogen (N): 0.03% max

• Hydrogen (H): 0.012% max

• Others (Al, V): 0.10% max

Mechanical Properties:

• Tensile Strength: 345–450 MPa

• Yield Strength: 275–345 MPa

• Elongation: 20–30%

• Hardness (HB): 150–200 HB

• Density: 4.51 g/cm³

Features & Advantages:

• Excellent corrosion resistance in oxidizing and reducing environments, including seawater and chemical solutions.

• High ductility and formability for complex shapes.

• Biocompatible and non-toxic for medical applications.

• Good weldability and ease of fabrication.

Applications:

• Chemical processing equipment: heat exchangers, tanks, piping.

• Marine hardware: shafts, fasteners, and propellers.

• Aerospace components where corrosion resistance is more critical than strength.

• Medical instruments and implants where biocompatibility is required.

Standards & Specifications:

• ASTM B348 / B861

• AMS 4928 / AMS 4975

• Equivalent grades: ISO 5832-2, UNS R50400

Overview:
1.2379 is a high-carbon, high-chromium cold-work tool steel renowned for its exceptional wear resistance, hardness, and dimensional stability. It is widely used in precision tooling applications requiring long service life, such as dies, punches, and cutting tools. This grade is equivalent to AISI D2.

Chemical Composition (Typical %):

• Carbon (C): 1.50–1.60%

• Chromium (Cr): 11.50–13.50%

• Manganese (Mn): 0.30–0.50%

• Silicon (Si): 0.20–0.50%

• Molybdenum (Mo): 0.70–1.20%

• Vanadium (V): 0.10–0.30%

• Phosphorus (P): 0.030% max

• Sulfur (S): 0.030% max

Mechanical Properties:

• Hardness (HRC): 55–62 (after heat treatment)

• Tensile Strength: 1600–1800 MPa

• Impact Toughness: Moderate; suitable for cold-work tooling, not high-impact applications

• Wear Resistance: Excellent

Features & Advantages:

• Outstanding wear and abrasion resistance

• High dimensional stability during heat treatment

• Can be precision ground for tooling applications

• Good machinability in annealed condition before hardening

Applications:

• Cold work dies, punches, and molds

• Industrial knives and shear blades

• Forming and stamping tools for metal and plastic industries

• High-wear components requiring long-term hardness and durability

Standards & Specifications:

• DIN: 1.2379

• Equivalent Grades: AISI D2, SKD11 (JIS)

Overview:
Titanium Grade 5, also known as Ti-6Al-4V, is the most widely used titanium alloy. It is an alpha-beta alloy offering an excellent combination of high strength, low weight, corrosion resistance, and biocompatibility. It is extensively used in aerospace, medical, marine, and chemical industries.

Chemical Composition (Typical %):

• Titanium (Ti): Balance

• Aluminum (Al): 5.5–6.75%

• Vanadium (V): 3.5–4.5%

• Iron (Fe): 0.3% max

• Oxygen (O): 0.2% max

• Nitrogen (N): 0.05% max

• Carbon (C): 0.08% max

• Hydrogen (H): 0.012% max

Mechanical Properties:

• Tensile Strength: 895–950 MPa (annealed)

• Yield Strength: 830–880 MPa

• Elongation: 10–15%

• Hardness (HB): 330–350 HB

• Density: 4.43 g/cm³

Features & Advantages:

• High strength-to-weight ratio, making it ideal for aerospace and high-performance applications.

• Excellent corrosion resistance in oxidizing and reducing environments, including seawater and acids.

• Biocompatible, suitable for medical implants and devices.

• Good fatigue and creep resistance.

Applications:

• Aerospace components: engine parts, airframes, landing gear.

• Medical implants: surgical instruments, prosthetics, and dental implants.

• Marine hardware: shafts, propellers, and fasteners.

• Chemical processing equipment and high-performance automotive parts.

Standards & Specifications:

• ASTM B348 / B861

• AMS 4928 / AMS 4975

• Equivalent grades: ISO 5832-3, UNS R56400

• Titanium Mesh Plate (titanium mesh sheet)
• Type: punched
• Grades: 1, 2, 5, 7, 12, etc